E-SKY NANO Double Rotor Helicopter - Flight Confirmed

E-SKY NANO Double Rotor Helicopter - Flight Confirmed
Purchased from an auction site, this listing includes only the helicopter body and transmitter. It comes with a 3.7V 380mAh LiPo battery and a USB charger. The control stick on the transmitter was broken, so it has been reinforced with a bolt and heat shrink tubing. The stabilizer bar was missing from the helicopter body, so a replacement has been fashioned from spare parts. It flies stably.

Getting Started: Insert dry batteries into the transmitter and turn on the power switch. The transmitter LED will light up. When you connect the battery to the helicopter, the LED will blink, but after a short while, the LED will turn off, indicating a successful bind. Binding is not possible unless the throttle stick on the transmitter is at its lowest position.

Operation: Mode 1 (right-hand throttle). Operation is the same as a standard 4-channel helicopter.

Ending Use: Disconnect the battery from the helicopter. Then, turn off the transmitter's power switch. The LED will blink and a beeping sound will continue. This is likely some kind of warning, but the manual is missing, so the exact reason is unknown. After turning off the transmitter's power switch, open the dry battery cover and remove and reinsert the batteries. The LED will turn off and the beeping will stop.

- Brand: E-SKY Double Rotor Helicopter
- Model: NANO
- Accessories: Transmitter, Battery, Charger
- Batteries: Requires 4 AA batteries

Thank you for looking.
Type: Radio Control
Type: Helicopter
Type: Double Rotor

This is an older model with modifications made to the battery area. No claims or returns, please.
Type: Radio Control
Type: Drone